Auto Carbon Systems Flow up to 50lpm

Auto Carbon Systems Flow up to 50lpm

Automatic High Flow Carbon Filter. Flow rate: Domestic, Commercial, and Rural High Flow Carbon Filters. Carbon filters are used to remove or reduce a variety of contaminants from water. Activated carbon* filters are particularly good at removing chlorine, tastes, odours, pesticides, volatile and organic carbons, dissolved colour and chloramines. Most carbon filters are used as point of use [POU] devices where the proportion of water used is small in comparison to the rest of the establishment, thus the filter can be relatively small (POU filters have a typical flow of around 2 - 4 litres per minute and a throughput life of between 10,000 and 20,000 litres). Where it is necessary to treat all incoming water [point of entry - POE], the High Flow Carbon Series presents the best cost effective solution to handle the much higher flow rates and provide a longer life throughput. * highly porous adsorbent carbon Features With Automatic back- flushing, the need for maintenance is all but elimiinated. Backwash for 5 minutes once a week. Replenish carbon annually or when chlorine, taste, odours or targeted contaminants start to break through. Uses Chlorine removal for people with sensitive skin Restaurants Industry & Factory Tropical & Indigenous Fish Outlets/ Breeders Poultry Farms Hydroponics Breweries Colour reduction in supply water When exhausted, the medium is simply replaced with more, inexpensive, activated carbon. It is advised that carbon is replaced annually, regardless of throughput. Min Operating Pressure : 140 kPa (20 psi) Max Operating Pressure : 700 kPa (100 psi) Upto 50lpm

Product Code: AC1252
Availability: In Stock
Price: $2,351.75
Qty:     - OR -   Add to Compare
© - The Watershed. All Rights Reserved. Site designed & hosted by Smokeylemon.